Info Manual

This is my digital tachometer i made a long time ago on my suzuki shogun 125cc and still in active up to date. The tachometer incorporates a programmable shift lights, the red line can be programmed depends on where to shift at a certified RPM...watch the video to see it in action.

This is the procedure of how to install TYPE R or MOTO R analog tachometer on motorcycles, The photo shown, (disregard the blurred image)
There are 5 wires comig out from this tachometer, namely
1.Green wire
2. Black wire
3. Yellow/black stripe wire

4. Red wire
5. Solid yellow wire

The two wires that is being hold by black tube is for the tachometer backlight numbers 4 and 5.


The other 3 wires left is for the input and the supply of the tacho itself, The GREEN wire (1) sometimes mistaken by others is used mainly by china as GROUND, this is also being used by some scooters made by them..(2) which is BLACK also mistaken as ground is actually the POSITIVE line of this tachometer. (3) is the input of the tachometer...This must be tapped on the primary side of the IGNITION COIL after the CDI output....and not from the secondary side to where your spark plug leads to....