Showing posts with label FET voltage regulator. Show all posts
Showing posts with label FET voltage regulator. Show all posts

Tuesday, October 20, 2015

FET type motorcycle voltage regulator

This is another voltage regulator for motorcycles that uses Field Effect Transistor for better charging efficiency of the system, although still using half wave bridge system on charging the battery, the control to which the system monitors the battery condition. What makes it better is that is a MOSFET controlled device rather than the crude SCR shunt type that is on most bikes until recently and also is a 50A rated device.
MUCH better voltage regulation and runs cooler too due to more efficient devices and control circuitry.The SCR shunt type consumes more energy in the Regulator itself than the bike is using and dumps a ton of current into the heatsink (feel yours & just see how hot those things run!!!! - don't touch it - you'll burn yourself - seriously!) The problem is exacerbated because their efficiency goes even lower when they get HOT so it's a vicious circle. Heat is the number 1 killer of these devices.
Incidentally its a misconception that shunt type work harder with increased load i.e. higher-wattage lights, etc - actually, the higher the load on the output, the less work the shunt regulator does in dumping that excess energy and will actually run cooler!!

The FET has extremely low resistance in conducting state and this results in a lower dissipated power from the device while conducting load current, as opposed to the SCR which shunts the maximum current across a significant volt drop, resulting in a higher dissipated power - and resulting temperature, much more so than the FET device. 


The picture shows a typical FET type voltage regulator for motorcycles, as opposed to the SHUNT type to where an SCR is used to control the windings to generate more than enough on the system, here an FET is used tag as Q5 in the diagram, IC2a is the control circuitry of the battery charge and discharge. D1 and D2 is the rectifier that converts the AC voltage of the stator to DC that charges the battery.

Read more »